How it worked
Turn a knob on the side, and time passes: pointers and dials move to show where the Sun, Moon and planets are in the sky, what phase the Moon is in, which month of a 19-year calendar it is, and when an eclipse may be coming.
Only about a third of the machine survives, so parts of what follows are reconstructions. Where researchers are unsure, we say so.
The box
The Mechanism sat in a wooden case a little smaller than a shoebox -- about the size of a mantel clock. On one side was a knob. Turning it drove a large gear wheel round once a year, carrying the date pointer; the other gears were driven from that wheel.
On a modern working model described in Nature, turning the knob makes the Moon pointer go all the way round the dial while the Sun moves just a twelfth of the way.
The front: a cosmos
The front had two rings, one inside the other: the zodiac and a calendar of the days of the year. The surviving calendar scale follows the Egyptian calendar.
Inscriptions describe the Sun, the Moon and all five planets known in antiquity -- Mercury, Venus, Mars, Jupiter and Saturn. They say the planets were marked by "little spheres" and the Sun by a "little golden sphere." According to the historian Alexander Jones, the pointers seem to have carried colored balls: gold for the Sun, fiery red for Mars.
A small ball, about 6 millimeters across and half black, half white, turned to show the phase of the Moon -- black for a new Moon, white for a full Moon.
Most of the gears for the planets are lost. In 2021 a team at University College London published a model in which the outputs sit on nested tubes driving rings for the Moon, the lunar nodes, Mercury, Venus, the Sun, Mars, Jupiter, Saturn and the date. Two numbers read on the front cover in X-rays, 462 and 442, matched the cycles they used for Venus and Saturn, in years. The team are careful to say they cannot claim their model is a replica of the original.
The back: calendars and eclipses
The back had two large spiral dials, one above the other. A pointer at the center of each traced its way slowly round the spiral groove, like a record stylus.
- Upper spiral -- the calendar. A 19-year calendar of 235 lunar months (the Metonic cycle), laid out as a spiral of five turns. Its 12 month names are Corinthian, a clue to where it was made.
- Lower spiral -- eclipses. The Saros cycle of 223 lunar months, laid out as a spiral of four turns, with symbols marking the months when an eclipse could be expected. One Saros lasts about 18 years, 11 days and 8 hours; eclipses repeat in a similar pattern after each one.
- A small dial -- the Games. A small dial in the upper half followed the four-year cycle of the Olympiad and the other Panhellenic Games, such as the Naa and the Halieia.
Inside: the gears
30 corroded bronze gear wheels survive. The biggest took up nearly the whole width of the box; the smallest is less than a centimeter across. They all have triangular teeth -- anything from 15 to 223 of them -- and each would have been cut by hand from a single sheet of bronze.
The cleverest part may be a pin and slot. Two wheels sit almost, but not exactly, on top of each other. A pin on the lower wheel pushes the upper wheel round through a slot, and because their centers are slightly apart, the upper wheel speeds up and slows down. That copies the way the Moon seems to move faster when it is nearer to us -- an idea worked out mathematically by the Greek astronomer Hipparchos (also spelled Hipparchus). To follow how that pattern itself shifts, about every nine years, the pin-and-slot pair rides on another gear.
The Mechanism combined cycles from Babylonian astronomy, mathematics from Plato's Academy and Greek astronomical theories. The 2021 model needs 69 gears in all, including the 30 that survive.
A machine with a manual
The fragments carry thousands of tiny text characters, some less than 2 millimeters high. Many were hidden inside the corroded fragments until X-ray imaging in 2005; the 2006 study roughly doubled the number of characters that could be read. Part of the text, on the back cover, works as a kind of user manual, describing the displays on the front.
Other inscriptions list the risings and settings of stars and the cycles of the planets.
Turn the handle
The two back spirals are easy to model with arithmetic. In 19 years there are 235 lunar months, so the calendar pointer goes round its five-turn spiral once every 235 months. The eclipse pointer goes round its four-turn spiral once every 223 months.
This is a simplified model, not a replica: here every dial starts at its first month together, and the Games dial simply counts years of 235/19 months.
- Months turned
- 0
- Calendar spiral
- month 1 of 235, turn 1 of 5
- Eclipse spiral
- month 1 of 223, turn 1 of 4
- Games dial
- year 1 of 4
The interactive model needs JavaScript. Everything it shows is also explained in words in The back: calendars and eclipses.
Did it really work?
Its makers were certainly precise. A 2024 study at the University of Glasgow found that holes under a broken calendar ring were placed with an average radial variation of just 0.028 millimeters, and that the ring most likely had 354 or 355 holes -- a lunar year -- rather than 365 or 360.
Whether the whole machine ran smoothly is still debated. A 2025 study by Esteban Guillermo Szigety and Gustavo Francisco Arenas, posted online as a preprint, simulated the gears and found that their triangular teeth alone would cause only tiny errors, but that manufacturing errors as large as some earlier measurements suggest would make the gears likely to jam. They concluded that either the Mechanism never worked or the real errors were smaller than measured -- and they gave reasons to doubt those measurements. They describe their results as speculative.